Eurotel cordless phone manual

In idle: 1. Enter the revised name, phone number and Melody. Enter the first character of the name by multi-tap. This step is optional. This feature is available if you have subscribed the Caller Line Identification service with your network service provider. The number will be shown on the LCD when the phone is ringing. If the number matches with one of the entries in your private phonebook, the callers name stored in the private phonebook will be displayed with the number.

If the caller number is withheld, Withheld will display. If the caller number is unavailable, Out Of Area will display. Note: If your answering machine is switched off, the phone will enter into the remote access mode after 10 rings. The default code is For details of how to set a new code, see the User Guide 8. When the call list is full, the oldest call will be replaced by a new call. Follow steps 1 to 3 in Section 6. Note: Name and number are mandatory to enter in order to save it as a phonebook entry.

Follow steps 1 and 2 in Section 6. If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. Follow steps 1 to 3 in section 4. The external call is put on hold automatically and the called handset rings. The external call is transferred to the called handset.

The three parties can share the conversation and no network subscription is required. During an external call: 1. Follow Steps 1 to 3 in section 4. Any handset hangs up during a conference call will leave the other handset still in connection with the external call.

Follow steps 1 to 2 in Section 7. Note: If incorrect input is detected, an error tone will be emitted and the cursor will stop at the incorrect input. Note: Time input is time format dependent. Use 24 hours input if time format is 24 hours. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound again at the end of the snooze period of two minutes. Note: a. Key press is still applicable if handset keypad is locked and when the alarm time is reached. The alarm volume level is the same as the settings of the handset ringer volume.

If the handset ringer is set to Volume Off, the alarm still sounds at Volume 1 level. During ringing, the alarm will not sound when the alarm time is reached. However, if snooze function is enabled, the alarm will sound again at the end of the snooze period provided that it is not ringing or in paging mode at the end of the snooze period.

In Idle: 1. Your phone comes with a selection of settings that you can change to personalize your phone the way you like it to work.

Note: The respective ringer melody will be played while browsing the melody list. Note: The respective ringer volume will be played during your selection.

You can turn on or off the key tone. You can also turn on the alert tones when low battery and out of range are detected. Note: The maximum number of characters of handset name is The respective wallpaper will display while browsing the wallpaper list. The respective color theme effect will display while browsing the colour theme list. The respective contrast effect will display while browsing the contrast level list. If call barring is activated, internal calls and conference calls are still available.

Follow steps 1 to 4 in Section 8. Note: If Barring Mode is set to On and Barring Number is set, your phone will check the first 4 digits of your dialing number with the set bar numbers. If the dialing number matched with any one of the set bar numbers, Call Barred will display. The maximum length of SOS number is 4 digits. Default 4-digit system PIN is Enter the system PIN. Enter the SOS number. Note: If the selected base is found successfully, Saved will display, otherwise, Failed will display.

After reset, all your settings related to handset will be deleted, but your phonebook entries remain unchanged. The antenna icon on the de-registered handset will be off.

Note: You cannot de-register the handset that you are currently using. Enter the 4-digit system PIN. Note: If handset de-registration is unsuccessful, Invalid HS will display.

Note: If handset de-registration is successfully done, HS Deleted will display. Please contact your local service provider for the correct settings. It is used to protect your phone against unauthorized use. The default system PIN code is Enter the old system PIN.

After reset, all your settings related to base unit will be deleted, but your phonebook entries remain unchanged. Note: If the PIN code is entered correctly and is confirmed to restore the Base settings to default settings, Reset will display.

Up to five handsets can be registered to a single base station. If the handset registration is successful, you will hear a confirmation tone and will return to idle screen. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. The base station that is successfully registered is in bold in the Registration menu.

Your phone includes a telephone answering machine TAM that records unanswered calls when it is on. The answering machine can store up to 59 messages within the maximum recording time of approximately 12 minutes. As well as recording incoming messages, you can record memos for other users of your phone. When the answering machine is set to OFF, calls will be answered after 10 rings and the answer only message will be played to your callers.

They will not be able to leave you a message. Record Memo You can record your memo message for another user. Memo recording can still function even when the answering machine is turned off. This mode can be changed to Answer Only which does not allow callers to leave a message.

In that case, your callers will be prompted to call back later. Repeat Steps 1 to 4 in Section 9. You can set the answering machine to answer after two to nine rings or Time Saver.

Use the 4-digit remote access PIN code to prevent other people from unauthorized access of your answering machine. The default remote access PIN is User is requested to enter the valid remote access PIN again in Step 5. Place a call from a tone-dialing phone to your Activity Press the following keys to carry out your desired function.

Keys While message is not playing Functions. If you have difficulty with your phone, please try the suggestions listed below. Problem Cause a.

The call does not work. No display. Solutions a. Check the connections. Unplug and plug back in the mains.

Check that the telephone line cord has been plugged into the base station and the phone socket. Check the base station plug and the V plug remove and plugin. Wait until the line is unoccupied. Use the original connection cord. Remarks: An asterisk is placed at the beginning of the new message number to indicate that it is a new message.

Note: After new message is played, the new message will be saved as an old message automatically unless it is deleted. Stop: Stop the current message playback and return to the Answer Machine menu. Next: Skip to play the next message. The date and time information of the next message will display if there is next message.

Previous: Skip to repeat playing the current message from the beginning. The date and time information of the current message will display. Delete: Delete the current message and the next message will be played. Note: Alternatively, you can use the following shortcut keys on handset to control different operation during message playback. Press twice to skip backward to play the previous message. Note: New messages will not be deleted. While message is playing Delete the current message playback Repeat playing the current message from the beginning.

Stop the current message playback Skip to play the next message Stop the current message playback. The connection cord of the base station is not plugged in.

The adapter cord is not plugged in correctly in the base station. The line is busy, as another handset is used. Wrong connection cord no Euro AS. Dialing prefix is needed.

Base station out of range. Base station not connected to mains. Service not activated or wrong operator or wrong setting Empty battery. Insert the dialing prefix Reduce the range. Connect base station to mains. Check your Subscription with network or change the dial mode. Recharge battery. You may be able to select a different language for your default OGMs. Please contact the technical support of the network provider for further information.

This telephone is not equipped with a grounding function! Therefore some of the functions may be limited when used in PBX systems. Technical Support. You can then identify the caller and decide whether to take the call in person. If the answering machine is set to ON, when there is an incoming message, the handset will display Screen? The handset who picks up the call can listen.

You can listen to who is leaving the message and decide whether to pick up the call or not. The handset will display Screening. If the answering machine is in the process of recording, the message already stored will be saved. When you record your own OGM, it will be used when the answering machine answers the call. If the fault persists Disconnect the base unit from the telephone line and plug a different phone into the master telephone socket.

Try making a call. If this works, the line is OK. If the call does not work, and you are using a two-way socket adapt er, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty.

If you cannot make a call, the fault may be on the exchange line. Apple Telephone Manuals. ArtDio Telephone Manuals. Aspire Digital Telephone Manuals. Asus Telephone Manuals. Atlas Sound Telephone Manuals.

Atlona Telephone Manuals. Aube Technologies Telephone Manuals. Audiovox Telephone Manuals. Avanti Telephone Manuals. Avaya Telephone Manuals. Axxess Interface Telephone Manuals. Aztech Systems Telephone Manuals.

Basic Line Telephone Manuals. Beko Telephone Manuals. Belgacom Telephone Manuals. Belkin Telephone Manuals. BellSouth Telephone Manuals. Binatone Telephone Manuals. Bizfon Telephone Manuals. Black Box Telephone Manuals. Blackberry Telephone Manuals. BlueAnt Wireless Telephone Manuals. BMW Telephone Manuals. Bogen Telephone Manuals.